|
| Nome da marca: | WANSHIDA |
| Número do modelo: | Q43L-4000 |
| Quantidade mínima: | 1 conjunto |
| Preço: | negotiable |
| Prazo de entrega: | 25 dias |
| Condições de pagamento: | Western Union,L/C,T/T |
The Q43L-4000 Hydraulic Gantry Shear is a heavy-duty gantry cutting machine designed for processing bulky and mixed scrap in high-volume recycling operations.
With a 6000 × 1400 × 700 mm extra-long press box and a 1400 mm cutting blade, this model is optimized for handling oversized, irregular, and mixed scrap that requires strong compression before cutting.
Compared with mid-size gantry shears, the Q43L-4000 places greater emphasis on feeding capacity and material adaptability.
Its large press box allows continuous loading of mixed scrap using cranes or grabs, while the stable cutting system ensures consistent output even when material composition varies significantly.
Extra-Long Press Box for Mixed Scrap
The 6000 mm press box length enables loading of long, bulky, and tangled scrap without extensive pre-cutting, improving feeding efficiency.
Top Compression and Guided Cutting
Scrap is compressed from above before each cutting cycle, stabilizing mixed materials and improving cutting consistency.
Reinforced Gantry Frame Structure
The gantry frame is designed to withstand uneven loads caused by mixed and irregular scrap, maintaining structural stability over long-term operation.
Long Blade for Wide Cutting Coverage
The 1400 mm blade provides a broad cutting area, suitable for processing mixed scrap bundles and large cross-section materials.
Controlled Cutting Speed
Operating at 3–4 strokes per minute, the cutting system balances force application and productivity, especially important when material density varies.
Optimized for Mixed Scrap Composition
Blade geometry and cutting logic are designed to handle inconsistent scrap shapes and densities without excessive shock.
Dual-Motor Hydraulic Drive
Two 45 kW motors deliver stable hydraulic power, ensuring sufficient force for compressing and cutting bulky scrap.
Designed for Grab and Crane Feeding
The machine layout supports continuous loading using cranes, grabs, or conveyors.
Stable Operation Under Variable Load
Power output and hydraulic response are tuned for fluctuating material resistance typical of mixed scrap.
| Model | Shearing Force (KN) | Blade Length (mm) | Press box size (mm) | Cutting Frequency (times/min) | Power (kW) |
|---|---|---|---|---|---|
| Q43L-4000 | 4000 | 1400 | 6000*1400*700 | 3-4 | 45*2 |
The Q43L-4000 Hydraulic Gantry Shear is suitable for:
It is especially suitable for large recycling yards where scrap composition is complex and feeding continuity is critical.
Extra-Large Press Box for Bulky Scrap
Handles long and tangled scrap efficiently without frequent feeding interruptions.
Designed for Mixed Material Conditions
Maintains stable cutting performance even when scrap density and shape vary.
Higher Throughput Than Smaller Gantry Models
Longer press box and higher power improve overall processing capacity.
Reliable Structure for Uneven Loads
Gantry frame and compression system are built to handle unbalanced material loads.
Ideal for High-Volume Recycling Yards
Best choice when material diversity and feeding efficiency are key concerns.
It is designed for bulky, mixed, and irregular scrap that requires compression before cutting.
The Q43L-4000 has a significantly longer press box and higher power, making it better suited for mixed and oversized scrap.
Yes. It is designed for continuous industrial operation with stable output.
Yes. The compression system and reinforced frame are designed for uneven material distribution.
Its large press box and strong adaptability to mixed scrap make it ideal for high-volume recycling yards.
Contact us today to receive:
Customization available for blade material, automation level, and electrical standards to meet different country requirements.
