|
|
| Nome da marca: | WANSHIDA |
| Número do modelo: | Y83Q-135 |
| Quantidade mínima: | 1 conjunto |
| Preço: | negotiable |
| Prazo de entrega: | 45 dias |
| Condições de pagamento: | T/T |
The Y83Q-135 Front Out Metal Baler is a hydraulic metal baling machine designed for scrap metal recycling, aluminum scrap compression, light steel scrap baling, and metal offcut handling. With a 1350kN nominal force and a 1300×600×600mm compress room, this machine can compress loose, bulky, and irregular scrap metal into high-density bales for easier storage, transportation, remelting, and resale.
This model is also known as a Hydraulic Metal Baler, Front Out Metal Baler, Scrap Metal Baler, Aluminum Scrap Baler, or Metal Recycling Baler. It is suitable for small and medium-sized recycling yards, metal processing plants, aluminum profile factories, scrap collection centers, and recycling companies that need to process aluminum scrap, aluminum profiles, aluminum cans, sheet metal offcuts, copper and aluminum offcuts, light scrap steel, and other compressible metal waste.
The Y83Q-135 uses a forward-out bale discharging structure, which means the bale is pushed out from the front of the machine. This design is easy to understand, convenient for bale collection, and suitable for workshops or recycling sites where simple operation and practical layout are important.
The machine adopts hand valve control, which is simple, reliable, and easy to maintain. For customers who do not require a fully automatic baling line but still need stable compression performance, this 135 ton hydraulic metal baler provides a practical and cost-effective solution.
The bale dimension is (50–300)×600×240mm, with the bale length changing according to feeding amount and material condition. The bale density can reach more than 1800kg/m³, helping customers reduce scrap volume, improve loading density, lower transportation cost, and increase scrap recycling value.
With 18.5kW power, a capacity of approximately 1800–2500kg/h, and a single cycle time of less than 150 seconds, the Y83Q-135 is suitable for daily scrap baling operations. The machine is manufactured according to ISO9001:2000 standard, with one year guarantee and lifelong maintenance support. WANSHIDA can also customize the machine according to the customer’s material type, local voltage, site conditions, and bale size requirements.
In the scrap metal recycling and metal processing industries, many customers face the same problem: scrap metal has value, but it is loose, bulky, irregular, difficult to store, and expensive to transport. Aluminum scrap, aluminum profile offcuts, aluminum cans, thin sheet metal, stamping offcuts, and light scrap steel can occupy large storage areas if they are not compressed.
For recycling yards and factories, loose scrap metal creates several practical problems:
At the beginning, some customers may use manual sorting, bags, baskets, or open stockpiles to handle scrap. However, as production volume increases, this method becomes inefficient. If loose scrap is not compressed in time, it takes more space, increases handling cost, and reduces recycling efficiency.
Therefore, using a suitable Hydraulic Metal Baler to compress loose scrap into compact bales has become an important way for many recycling companies and metal processing plants to improve efficiency.
The Y83Q-135 Front Out Metal Baler uses hydraulic pressure to compress loose scrap metal into high-density bales. With a 1350kN nominal force, it can effectively bale aluminum scrap, light steel scrap, metal offcuts, and non-ferrous metal waste.
After the scrap is loaded into the 1300×600×600mm compress room, the hydraulic system drives the pressing plate to compress the material. Once the bale is formed, it is discharged from the front of the machine. This forward-out design makes bale collection, handling, and stacking more convenient.
Compared with loose storage and manual handling, a metal baler helps customers build a more standardized scrap processing workflow.
By using the Y83Q-135 Metal Baler, customers can:
This machine is especially suitable for aluminum scrap and light metal scrap. For loose aluminum materials with large volume but relatively low thickness, the front out metal baler can help convert scattered scrap into compact bales and improve the overall recycling process.
| Item | Specification |
|---|---|
| Product Name | Y83Q-135 Front Out Metal Baler |
| Model | Y83Q-135 |
| Nominal Force | 1350kN / 135 Ton |
| Compress Room Size | 1300×600×600mm |
| Bale Dimension | (50–300)×600×240mm |
| Bale Density | >1800kg/m³ |
| Capacity | 1800–2500kg/h |
| Single Cycle Time | <150s |
| Power | 18.5kW |
| Bale Discharging | Forward-out |
| Operation | Hand Valve Control |
| Quality Standard | ISO9001:2000 |
| Warranty | One Year Guarantee and Lifelong Maintenance |
The Y83Q-135 Hydraulic Metal Baler can be widely used in scrap metal recycling, metal processing, aluminum processing, recycling resource handling, and light scrap steel compression.
It is suitable for baling aluminum profile offcuts, aluminum cans, aluminum sheets, aluminum plate offcuts, and other light aluminum scrap. After compression, the scrap volume is reduced and handling becomes easier.
Metal processing factories generate metal offcuts during stamping, cutting, forming, and fabrication. This machine helps compress loose scrap into bales for easier classification, storage, and recycling.
For small and medium-sized scrap collection centers, the Y83Q-135 can process light steel scrap, non-ferrous metal scrap, and mixed metal offcuts to improve storage and sales efficiency.
Recycling companies can use this baler to increase scrap density, reduce warehouse space, and improve transport economics.
For some remelting operations, compact metal bales are easier to store, weigh, and feed compared with loose scrap.
Suitable materials include:
The Y83Q-135 Front Out Metal Baler uses a hydraulic system to complete scrap compression and bale discharging. The working process usually includes the following steps:
Operators load scrap metal into the compress room. Depending on site conditions, feeding can be done manually or with the help of a forklift, grab, or conveyor.
After the hydraulic system starts, the pressing plate compresses the scrap inside the chamber. The 1350kN nominal force turns loose scrap into dense bales.
The material is compressed into a bale with a fixed cross section. The bale length may vary depending on feeding amount and material condition.
After compression, the bale is pushed out from the front of the machine. This design makes bale collection and further handling more convenient.
The operator uses the hand valve to control machine movements and complete repeated feeding, compression, discharging, and collection cycles.
This machine has a simple and practical structure. It is suitable for customers who need stable baling performance without a complicated automatic control system. Hand valve control also allows operators to adjust the working rhythm according to different material conditions.
When choosing a Metal Baler, customers should not only compare prices. Material type, capacity, bale size, discharging method, and site layout should also be considered.
If the main materials are aluminum scrap, aluminum profiles, aluminum cans, light steel scrap, sheet metal, and metal offcuts, the Y83Q-135 is usually a suitable choice. If the material is thicker, harder, or larger in size, a larger metal baler may be required.
Aluminum scrap is often bulky. It may not be very heavy, but it occupies a lot of space. Customers should check whether the compress room size is suitable for their actual material. If the scrap is very loose or large, a larger chamber option may be considered.
The Y83Q-135 has a capacity of approximately 1800–2500kg/h, suitable for medium-volume recycling yards and processing plants. For smaller scrap quantities, this model can meet daily handling needs. For higher capacity requirements, a larger model or more automated configuration may be recommended.
This model uses a forward-out discharging structure. The bale is pushed out from the front of the machine, making collection and site layout simple and practical.
Hand valve control is simple and easy to maintain. It is suitable for customers who prefer practical operation and lower system complexity. If higher efficiency or less manual operation is required, PLC control or semi-automatic configuration can also be considered.
Different countries use different voltage and frequency standards. The machine can be customized according to local power supply. Customers should confirm voltage, frequency, available power, and installation space before ordering.
It can process aluminum scrap, aluminum profile offcuts, aluminum cans, light steel scrap, sheet metal waste, copper and aluminum offcuts, and other compressible scrap metal. The exact application depends on material thickness, hardness, and size.
1350kN is approximately equal to 135 tons of pressing force. Therefore, this machine can also be called a 135 Ton Hydraulic Metal Baler or 135 Ton Front Out Metal Baler.
The bale cross section is 600×240mm, while the bale length is usually within 50–300mm. The final bale length depends on feeding amount, material type, and compression condition.
Yes. The Y83Q-135 is suitable for aluminum scrap, aluminum profiles, aluminum cans, and aluminum sheet offcuts. For bulky aluminum scrap, customers are advised to provide material photos and dimensions so that the chamber size can be confirmed.
Yes. WANSHIDA can customize voltage, material configuration, bale size, control method, and machine layout according to customer requirements.
The 1350kN nominal force is suitable for compressing light and medium scrap metal, especially aluminum scrap and sheet metal waste.
The chamber size is practical for aluminum scrap, light steel scrap, and metal offcuts, balancing machine footprint and processing capacity.
The bale is discharged from the front, making collection, handling, and site layout easier.
The operation is simple and reliable. Operators can control the baling process according to different material conditions.
The power configuration is suitable for daily scrap metal baling, offering a practical balance between energy use and processing ability.
The bale density can reach more than 1800kg/m³, helping improve transportation efficiency and recycling value.
The machine can be used for aluminum scrap, light steel scrap, metal offcuts, non-ferrous scrap, and furnace preparation materials.
The machine can be adjusted according to customer voltage, material type, capacity requirement, and operation habits.
WANSHIDA provides complete after-sales service for the Y83Q-135 Front Out Metal Baler.
Our service includes:
If customers have any problems during installation, commissioning, operation, or maintenance, they can contact us by phone, email, or online communication. Our technical team will provide timely support to help customers keep the machine running reliably.
