|
|
| Nama Merek: | Wanshida |
| Nomor Model: | Q43W-5000 |
| MOQ: | 1SET |
| Harga: | negotiable |
| Waktu Pengiriman: | 30 hari |
| Ketentuan Pembayaran: | L/C,D/P,D/A,T/T,Western Union,MoneyGram |
The Q43W-5000 Horizontal Container Scrap Shear is a high-capacity box-type hydraulic cutting system designed for continuous processing of loose, bulky, and mixed scrap metal in medium-to-large recycling yards and industrial scrap preparation lines.
With a 500-ton (5000 kN) shearing force, 1400 mm blade length, and a large 1400 × 600 mm cutting capacity, this model enables operators to load, compress, and cut scrap inside an enclosed chamber, achieving higher throughput and better cutting stability than entry-level container shears.
Compared with the Q43W-4000, the Q43W-5000 focuses on higher volume efficiency, stronger compression, and improved cutting continuity, making it suitable for facilities with stable daily scrap input and higher productivity requirements.
Q43W-5000 Horizontal Scrap Metal Shear
| Item | Data |
|---|---|
| Model | Q43W-5000 |
| Shearing Force (ton) | 500 |
| Blade Length (mm) | 1400 |
| Max. Cutting Capacity (mm) | 1400 * 600 |
| Cutting Frequency (times/min) | 3–4 |
| Power (kW) | 110 |
The enclosed box structure allows large volumes of loose scrap to be fed directly into the chamber, reducing manual handling and pre-cutting.
Scrap is compressed inside the container before cutting, ensuring more uniform material density and improved cutting efficiency.
The 1400 mm blade provides full-width cutting across compressed scrap bundles, reducing cycle time.
The 110 kW hydraulic system delivers stable pressure for continuous, medium-to-heavy duty operation.
Designed for consistent handling of large quantities of loose and mixed scrap.
Compression significantly reduces impact loads on the blade compared with open-structure shears.
Higher cutting frequency and larger cutting capacity support increased daily output.
The Q43W-5000 Horizontal Container Scrap Shear is suitable for:
Loose and mixed steel scrap
Sheet metal, frames, and fabricated scrap
Light to medium structural steel offcuts
Scrap preparation before baling, shredding, or melting
It is ideal for recycling yards transitioning from small container shears to higher-capacity, semi-continuous processing.
Loose and mixed scrap metal
Thin to medium steel sections
Irregular scrap requiring compression
Extremely thick round or square steel bars
Very large sectional steel better handled by alligator or gantry shears
Q43-5000 / Q43-6000 (Alligator Shears) → Sectional steel cutting
Q43W-4000 → Entry-level container shear
Q43W-5000 → Mainstream container shear for high-volume yards (this model)
Q43W-6300 / Q43L series → Heavy container or gantry shears for industrial-scale processing
