Y83-6300 630 Ton Scrap Briquetting Press for High-Density Cast Iron, Steel, Aluminum and Brass Chip Recycling

The Y83-6300 Scrap Briquetting Press is a heavy-duty hydraulic metal briquetting machine designed to compress loose steel chips, iron sawdust, cast iron chips, aluminum chips and brass chips into high-density cylindrical briquettes. With a nominal force of 6300kN, equal to approximately 630 tons, this machine produces briquettes with a size of Φ180*70–100mm. For cast iron sawdust, the processing capacity can reach 2000–3000kg/h, making it suitable for foundries, machining workshops, automotive parts factories, metal recycling yards and smelting plants.

Loose metal chips usually take up large storage space and may contain cutting fluid, oil or moisture. After being processed by a Scrap Briquetting Press, the chips are compressed into regular, dense and easy-to-handle briquettes. This helps reduce storage area, improve transport efficiency, increase furnace charging density and reduce metal loss during remelting.

The Y83-6300 cast iron briquetting machine uses a stable hydraulic drive system. It runs smoothly with no obvious vibration, making the operation safe and reliable. The PLC semi-automatic control system helps reduce manual labor and makes the equipment suitable for continuous industrial recycling operations. Only a simple underground footing is needed, which makes installation easier for most factory sites.

In machining and casting production, large volumes of steel chips, cast iron sawdust, aluminum chips and brass chips are generated every day. If these materials are stored or transported in loose form, companies often face several practical problems.

• Loose chips occupy valuable workshop space and make site management more difficult.
• Metal chips may carry cutting oil or coolant, causing pollution and extra cleaning work.
• Transportation of loose chips has low loading density, which increases logistics cost.
• Loose metal chips have a larger contact area with air during melting, which may cause higher oxidation loss.
• Some foundries and recycling buyers prefer regular high-density briquettes instead of scattered metal chips.

For companies that want to improve scrap value, reduce handling cost and make recycling cleaner, a Scrap Briquetting Press is a practical and cost-effective solution.

The Y83-6300 Scrap Briquetting Press uses 6300kN hydraulic pressure to compress loose metal chips into dense cylindrical briquettes. The finished briquettes are regular in shape and easier to stack, transport, weigh and feed into furnaces.

For cast iron sawdust, the machine can reach a capacity of 2000–3000kg/h, making it suitable for medium and large-scale production sites. The 45kW motor provides stable power for continuous operation while maintaining practical energy consumption.

With PLC semi-automatic operation, the operator can complete feeding, starting and monitoring more easily. The machine automatically completes pressing, pressure holding and briquette discharging steps according to the working cycle. For customers who want to reduce labor intensity and improve recycling efficiency, this metal briquette making machine offers a reliable solution for metal chip treatment before remelting.

The Y83-6300 metal chip briquetting press is widely used in metal recycling and industrial scrap treatment. It is suitable for the following applications:

• Machining workshops: for turning chips, milling chips, drilling chips and CNC machining waste.
• Foundries: for compressing cast iron chips and iron sawdust before remelting.
• Automotive parts factories: for recycling chips from engine parts, shafts, brake parts and precision components.
• Aluminum processing plants: for aluminum chip briquetting to reduce storage space and improve transport efficiency.
• Copper and brass processing plants: suitable as a brass chip briquetting machine to improve scrap handling value.
• Metal recycling yards: for centralized metal chip briquetting before resale or furnace charging.

The Y83-6300 Scrap Briquetting Press works through hydraulic compression. Metal chips are fed into the compression chamber, and the hydraulic system pushes the main pressing head to compress the loose material inside the mold. Under high pressure, the chips are formed into dense cylindrical briquettes.

The basic working process includes:

• Feeding: steel chips, cast iron chips, aluminum chips or brass chips are loaded into the compression area.
• Pressing: the hydraulic system provides 6300kN nominal force to compress the loose chips.
• Pressure holding: the machine keeps pressure for a short period to improve briquette density.
• Discharging: the finished cylindrical briquette is discharged after pressing.
• Cycle production: the PLC system controls the next working cycle for continuous operation.

Because the machine adopts hydraulic drive, the operation is smooth and stable, with no obvious vibration or impact. This makes it suitable for long-term industrial use.

When choosing a suitable Scrap Briquetting Press, customers should consider the following points:

1. Type of metal chips
   Different materials have different density, hardness and flow characteristics. Cast iron chips, steel chips, aluminum chips and brass chips may require different pressure levels and mold designs. If the main material is cast iron sawdust and high output is required, the Y83-6300 630 ton machine is a strong choice.
2. Hourly capacity requirement
   If the required capacity is around 2–3 tons per hour for cast iron sawdust, the Y83-6300 is suitable. For smaller output, a lower-tonnage model may be enough. For higher output, customized feeding and larger systems can be considered.
3. Finished briquette size
   This machine produces Φ180*70–100mm cylindrical briquettes, which are suitable for transport, stacking and remelting. If the customer has special requirements for diameter, height or briquette weight, the solution can be evaluated according to the material condition.
4. Automation level
   PLC semi-automatic operation is suitable for customers who want easier control and more stable production. If continuous feeding is required, conveyors, hoppers or other auxiliary systems can be matched.
5. Installation conditions
   The Y83-6300 only requires a simple underground footing. Before ordering, it is recommended to confirm the site voltage, foundation condition, feeding method and workshop space.

We provide complete after-sales support for the Y83-6300 hydraulic metal briquetting machine, including installation guidance, operation training, maintenance advice and spare parts supply. The machine comes with a one-year guarantee and lifelong maintenance service. If customers have questions about the hydraulic system, electrical control system, mold wear or briquette quality adjustment, our team can provide timely technical support.

Our goal is not only to supply a Scrap Briquetting Press, but also to help customers build a stable, efficient and sustainable metal chip recycling solution.